1712 Solutions and counting.
Binding for KOSTAL inverters of type PIKO IQ and PLENTICORE plus
Binding for the OpenTherm Gateway device designed by Schelte Bron, which allows communication to boilers and thermostats using the OpenTherm protocol.
For more information on the OpenTherm Gatew...
Binding for the MIYO smart irrigation system
OpenSense.network is a participatory open sensor data platform.
This binding provides a link between OpenSense.network and several weather data b...
This is the xPL binding for openhab 2.0. I upload it on the marketplace because currently it works fine for my needs and I do not plan to spend more time on it in order to have a complete and prope...
This is the initial development for Brumberg vitaLED binding [vitaled]. This binding integrates Brumberg vitaLED via the Brumberg vitaLED LAN master that communicates via DMX with the Brumberg vita...
Current Version of the MySensors Binding for Eclipse Smarthome.
This templates takes a binary input from a push button and plays either a doorbell sound on a connected speaker or uses a dog barking sound to scare away any visitors if nobody is at home.
The Plugwise Home Automation binding adds support to openHAB for the Plugwise Home Automation ecosystem. This system is built around a gateway from Plugwise called the 'Adam' which incorporates a Z...
Last Updated on Wednesday, January 8, 2020 - 08:12 by Bas van Wetten
PollyTTS is a TTS voice service utilizing a Internet based TTS service provided by amazon called Polly. It requires a set of API keys provided by Amazon to get access to th...
Last Updated on Thursday, February 8, 2018 - 21:43 by Robert Hillman
Updated Nikobus binding for OpenHab to support the module addresses as seen in the Niko PC application.
Last Updated on Wednesday, January 8, 2020 - 08:11 by Wouter Denayer
This action is used to send messages via the Pushbullet.com notification system
Last Updated on Tuesday, August 1, 2017 - 08:31 by Hakan Tandogan
This is an openHAB binding for Qbus
Last Updated on Friday, October 4, 2019 - 13:28 by Koen Schockaert
This binding integrates the Rachio Cloud API. It supports multiple controller with multiple zones (tested with Gen2 controllers). This are discovered after a bridge thing is configured including th...
Last Updated on Friday, November 16, 2018 - 12:58 by Markus Michels
Binding for Resol solar and heating controllers (including a lot of branded versions) which are connected via VBUS to a TCP/IP interface.
Last Updated on Monday, October 8, 2018 - 17:20 by Raphael Mack
Binding to control a Rotel audio device like a surround processor, a surround receiver, a stereo preamplifier, an integrated amplifier, a CD player or a tuner.
The binding supports HEX and ASCII...
Last Updated on Sunday, July 14, 2019 - 08:00 by Laurent Garnier
This is the Sager WeatherCaster port to OH2. I put it on the marketplace as it will not comply with OH2 development standards. If it's usefull for you, that's enough for me !
Last Updated on Wednesday, October 31, 2018 - 12:44 by Gaël L'hopital
The Satel Integra Alarm System allows openHAB to connect to your alarm system via TCP/IP network with ETHM-1/ETHM-1 Plus module installed, or via RS-232 serial port with INT-RS/INT-RS Plus module i...
Last Updated on Wednesday, December 4, 2019 - 14:39 by Krzysztof Goworek
This binding adds the possibility to read and set the state of your A/C using the Sensibo Sky.
Last Updated on Thursday, February 21, 2019 - 05:25 by Robert Kaczmarczyk
This is an Eclipse SmartHome addon which installs a new human language interpreter based on Stanford CoreNLP. It allows you to ask questions about the state of your house (e.g. "...
Last Updated on Monday, June 18, 2018 - 17:24 by John Sichi
SML is a communication protocol for transmitting meter data for so called smart meters. SML is similar to XML with regard to its ability to nest information tags within other tags. But the standard...
Last Updated on Thursday, January 3, 2019 - 07:45 by Matthias Steigenberger
This is an Eclipse Smarthome binding for Somfy RTS devices controlled via a CUL stick.
Last Updated on Monday, January 22, 2018 - 08:50 by Daniel Weisser
Binding for Sony products (TVs, AVRs, BluRays and possibly SoundBars [not confirmed yet]). Provides autodiscovery of compatible sony products and manipulation of them. This bindin...
Last Updated on Wednesday, November 8, 2017 - 17:52 by Tim Roberts
Binding to conrol Sony Projectors through:an Ethernet connection using PJ Talk or a (direct) serial connection or a serial over IP connection
Last Updated on Saturday, July 13, 2019 - 03:38 by Laurent Garnier
This is the Update release of the Spotify Binding with the following changes:
The deviceName was a option list with id as key, name as value. However that is not usable in rules. In rules onl...
Last Updated on Tuesday, April 9, 2019 - 06:48 by Hilbrand Bouwkamp
This binding, created by Martin Grześlowski, provides integration with Supla Cloud.
Right now supported are only Supla relay things - everything that can be turned on/off. Other d...
Last Updated on Tuesday, April 10, 2018 - 08:40 by Szczepan Kuzniarz
Upgraded SystemInfo binding with latest libraries.
Last Updated on Tuesday, January 29, 2019 - 08:32 by Miika Jukka
This binding is part of openHAB since version 2.3. If you're looking for the most stable version, use the binding from the distribution. The marketplace version will be for pre-releases or...
Last Updated on Wednesday, June 6, 2018 - 14:03 by Dennis Frommknecht
Get the latest version of the Eclipse IDE.