1505 Solutions and counting.
This binding provides support for reading out values from an Gruenbeck softener device (SC18, SC23, MC32) via the WIFI HTTP interface.
This action is used to send messages via the Pushbullet.com notification system
Binding for the Velbus home automation system (https://www.velbus.eu/).
This binding provides support for relays, dimmers, rollershutters, push buttons, pir sensors and temperature sensors.
This binding is part of openHAB since version 2.3. If you're looking for the most stable version, use the binding from the distribution. The marketplace version will be for pre-releases or...
Binding for Resol solar and heating controllers (including a lot of branded versions) which are connected via VBUS to a TCP/IP interface.
This template checks all temperature sensors of a group for abnormal values and activates an alarm if some threshold is exceeded by one of them.
A binding for ZMote devices.
ZMote is a IR transmitter that connects to your home WiFi network and let's you control all your IR enabled devices, like e.g. TVs, Blu-ray players, air conditioners...
This is the Sager WeatherCaster port to OH2. I put it on the marketplace as it will not comply with OH2 development standards. If it's usefull for you, that's enough for me !
This is the binding for an alarm controller inspired by Aritech and Abus
The binding allows you to create alarm controllers with a configurable amount of alarm zones. Each alarm zone has a type ...
Last Updated on Monday, December 17, 2018 - 10:33 by Gerhard Riegler
Pullrequest build of the Dresden Elektronik Deconz Binding for openhAB
Last Updated on Monday, August 26, 2019 - 02:29 by Bo Biene
This is an Eclipse SmartHome/openHAB binding for Australian weather forecast from Bureau of Meteorology (BOM).
Please see https://github.com/tomitan100/org.openhab.binding.bom for more...
Last Updated on Thursday, September 24, 2020 - 12:01 by Thomas Tan
The Bluetooth binding brings support for bluetooth devices into Eclipse SmartHome Framework. The following main use cases are supported by the binding:
Supports the following features:
Last Updated on Tuesday, September 25, 2018 - 06:06 by Vlad Kolotov
A transport implementation for the Bluetooth Binding based on Bluegiga API to work with BLE112 dongles (or similar).
Last Updated on Tuesday, September 25, 2018 - 06:10 by Vlad Kolotov
A transport implementation for the Bluetooth Binding based on TinyB library.
Last Updated on Tuesday, September 25, 2018 - 06:12 by Vlad Kolotov
This is the initial development for Brumberg vitaLED binding [vitaled]. This binding integrates Brumberg vitaLED via the Brumberg vitaLED LAN master that communicates via DMX with the Brumberg vita...
Last Updated on Wednesday, February 7, 2018 - 15:15 by Marcel Salein
The BTicino Smarther binding implements a bridge to the Legrand/Bticino Smarther v2.0 API and allows users to control their BTicino Smarther chronothermostat units (all models).
This binding is ...
Last Updated on Friday, June 26, 2020 - 02:44 by Fabio Possieri
Chamberlain MyQ system allows you to connect your garage door to the internet to be controlled from anywhere using your smartphone. Using this API, The Chamberlain MyQ Binding can get the stat...
Last Updated on Sunday, February 17, 2019 - 13:00 by Scott Hanson
openHAB2 version of ComfoAir Binding
Last Updated on Thursday, July 2, 2020 - 13:59 by Hans Boehm
Denon/Marantz binding for OpenHAB2.
Last Updated on Wednesday, January 3, 2018 - 09:13 by Jan-Willem Veldhuis
This binding provides support for the Drayton Wiser Smart Heating System. Thermostats, Thermostatic Radiator Valves and Smart Plugs are all supported.
Last Updated on Monday, February 18, 2019 - 04:30 by Andrew Schofield
This is the beta release with new features and bug fixes for the Dutch Smart Meter Requirements (DSMR) Binding for openHAB 2.
The binding is available in openHAB 2.4. Install this version i...
Last Updated on Wednesday, January 2, 2019 - 17:35 by Hilbrand Bouwkamp
The eBUS 2.0 binding is the successor for the 1.x binding. It has been completely rewritten and adapted to openHAB 2.0. This version can be completely customized using PaperUI.
Currently, this ver...
Last Updated on Sunday, June 24, 2018 - 13:26 by Christian Sowada
This rule template takes an energy consumption value as an input and controls a color light in the range from green to red for visualising the current consumption.
Last Updated on Tuesday, March 14, 2017 - 08:25 by Kai Kreuzer
The OpenOcean binding connects OpenHab to the EnOcean ecosystem. This binding uses an EnOcean gateway to retrieve sensor data and control actuators.
The followin things are f...
Last Updated on Sunday, June 30, 2019 - 16:21 by Daniel Weber
Last Updated on Thursday, March 16, 2017 - 09:32 by Kai Kreuzer
Control your SmartHome devices using Flic buttons (https://flic.io). Find more information about this binding on https://github.com/pfink/openhab2-flicbutton/
Last Updated on Saturday, January 11, 2020 - 18:31 by Patrick Fink
Fox Binding integrates with Nexwell Fox System – smart home solution with programmable automation. Provides tasks execution and results acquisition.
Last Updated on Thursday, March 26, 2020 - 05:39 by Kamil Subzda
This binding (v1.1.0-alpha) integrates with B+J FreeAtHome smarthome system by connecting to the SysAP.
Disclaimer: This binding is a private contribution and is not an official B+J product.
Last Updated on Monday, June 17, 2019 - 16:15 by Ru Eclipse