1743 Solutions and counting.
Binding for Sony products (TVs, AVRs, BluRays and possibly SoundBars [not confirmed yet]). Provides autodiscovery of compatible sony products and manipulation of them. This bindin...
The OpenOcean binding connects OpenHab to the EnOcean ecosystem. This binding uses an EnOcean gateway to retrieve sensor data and control actuators.
The followin things are f...
OpenSense.network is a participatory open sensor data platform.
This binding provides a link between OpenSense.network and several weather data b...
This binding adds the possibility to read and set the state of your A/C using the Sensibo Sky.
This is the initial development for Brumberg vitaLED binding [vitaled]. This binding integrates Brumberg vitaLED via the Brumberg vitaLED LAN master that communicates via DMX with the Brumberg vita...
This binding enables integration with the hyperion software.
The hyperion-project produces open source ambient lighting software.
See https://github.com/openhab/openhab2-addons/pull/2319 to...
The eBUS 2.0 binding is the successor for the 1.x binding. It has been completely rewritten and adapted to openHAB 2.0. This version can be completely customized using PaperUI.
Currently, this ver...
This templates takes a binary input from a push button and plays either a doorbell sound on a connected speaker or uses a dog barking sound to scare away any visitors if nobody is at home.
The Satel Integra Alarm System allows openHAB to connect to your alarm system via TCP/IP network with ETHM-1/ETHM-1 Plus module installed, or via RS-232 serial port with INT-RS/INT-RS Plus module i...
Last Updated on Sunday, May 10, 2020 - 10:08 by Krzysztof Goworek
Last Updated on Thursday, February 21, 2019 - 05:25 by Robert Kaczmarczyk
Last Updated on Wednesday, March 15, 2017 - 12:14 by Kai Kreuzer
Last Updated on Sunday, June 30, 2019 - 16:21 by Daniel Weber
This binding allows you to integrate modules (at the Moment AM, EM, JRM and DIM) of PHC, without the PHC control (STM).
In openHAB the binding depends on serial-transport.
Last Updated on Saturday, July 25, 2020 - 09:55 by Jonas H
openHAB binding for Vallox air ventilation units.
Last Updated on Wednesday, July 1, 2020 - 08:09 by Miika Jukka
This binding is part of openHAB since version 2.3. If you're looking for the most stable version, use the binding from the distribution. The marketplace version will be for pre-releases or...
Last Updated on Wednesday, June 6, 2018 - 14:03 by Dennis Frommknecht
Pullrequest build of the Dresden Elektronik Deconz Binding for openhAB
Last Updated on Monday, August 26, 2019 - 02:29 by Bo Biene
This template checks all temperature sensors of a group for abnormal values and activates an alarm if some threshold is exceeded by one of them.
Last Updated on Thursday, March 16, 2017 - 09:32 by Kai Kreuzer
This binding, created by Martin Grześlowski, provides integration with Supla Cloud.
Right now supported are only Supla relay things - everything that can be turned on/off. Other d...
Last Updated on Tuesday, April 10, 2018 - 08:40 by Szczepan Kuzniarz
An OSRAM/Sylvania Lightify/SMART+ binding for openHAB2 that allows Lightify/SMART+ devices to be used via a Lightify gateway. Currently lights and power switches are fully supported, motion sensors...
Last Updated on Thursday, June 13, 2019 - 20:38 by Mike Jagdis
This binding provides support for reading out values from an Gruenbeck softener device (SC18, SC23, MC32) via the WIFI HTTP interface.
Last Updated on Monday, January 7, 2019 - 08:48 by Matthias Steigenberger
This is the xPL binding for openhab 2.0. I upload it on the marketplace because currently it works fine for my needs and I do not plan to spend more time on it in order to have a complete and prope...
Last Updated on Friday, December 22, 2017 - 07:57 by gael lhopital
A simple Binding with a single channel for showing the Water Alert Level for regions/cities in New Zealand.
Intended to be used with sprinkler automation.
Last Updated on Friday, June 12, 2020 - 00:26 by Stewart Cossey
ESH binding for OVO Energy Smart Meter Customers
Last Updated on Friday, March 17, 2017 - 13:08 by Chris Foot
Binding for Resol solar and heating controllers (including a lot of branded versions) which are connected via VBUS to a TCP/IP interface.
Last Updated on Monday, October 8, 2018 - 17:20 by Raphael Mack
This is the beta version of the binding and adds support for new features/fixes not yet available in the binding available in openHAB. This beta version adds the following:
Last Updated on Friday, August 30, 2019 - 08:41 by Hilbrand Bouwkamp
Last Updated on Tuesday, January 29, 2019 - 10:38 by Dimitri Staufer
This is the Sager WeatherCaster port to OH2. I put it on the marketplace as it will not comply with OH2 development standards. If it's usefull for you, that's enough for me !
Last Updated on Wednesday, October 31, 2018 - 12:44 by gael lhopital
This is an openHAB binding for Qbus
Last Updated on Friday, October 4, 2019 - 13:28 by Koen Schockaert