1470 Solutions and counting.
This rule template takes an energy consumption value as an input and controls a color light in the range from green to red for visualising the current consumption.
The eBUS 2.0 binding is the successor for the 1.x binding. It has been completely rewritten and adapted to openHAB 2.0. This version can be completely customized using PaperUI.
Currently, this ver...
The Konnected Alarm Panel revives a wired alarm system by connecting your wired sensors directly to OpenHAB for completely open source security and automation. This binding connects to Konnected de...
This new binding integrates BTicino / Legrand MyHOME(r) BUS & MyHOME_Play (wireless) devices using the OpenWebNet protocol.
It is the first known binding for openHAB 2 that su...
The Bluetooth binding brings support for bluetooth devices into Eclipse SmartHome Framework. The following main use cases are supported by the binding:
Supports the following features:
This template checks all temperature sensors of a group for abnormal values and activates an alarm if some threshold is exceeded by one of them.
This action is used to send messages via the Pushbullet.com notification system
Upgraded SystemInfo binding with latest libraries.
Last Updated on Monday, September 21, 2020 - 17:35 by Massi Ti
The Satel Integra Alarm System allows openHAB to connect to your alarm system via TCP/IP network with ETHM-1/ETHM-1 Plus module installed, or via RS-232 serial port with INT-RS/INT-RS Plus module i...
Last Updated on Thursday, September 3, 2020 - 15:49 by Krzysztof Goworek
PollyTTS is a TTS voice service utilizing a Internet based TTS service provided by amazon called Polly. It requires a set of API keys provided by Amazon to get access to th...
Last Updated on Thursday, February 8, 2018 - 21:43 by Robert Hillman
An OSRAM/Sylvania Lightify/SMART+ binding for openHAB2 that allows Lightify/SMART+ devices to be used via a Lightify gateway. Currently lights and power switches are fully supported, motion sensors...
Last Updated on Thursday, June 13, 2019 - 20:38 by Mike Jagdis
Current Version of the MySensors Binding for Eclipse Smarthome.
Last Updated on Thursday, February 20, 2020 - 13:59 by Tim Oberfoell
This is the beta version of the binding and adds support for new features/fixes not yet available in the binding available in openHAB. This beta version adds the following:
Last Updated on Friday, August 30, 2019 - 08:41 by Hilbrand Bouwkamp
Last Updated on Tuesday, September 25, 2018 - 06:06 by Vlad Kolotov
Interface to a vallox central venting unit.
Last Updated on Saturday, September 2, 2017 - 13:26 by Hauke Fuhrmann
This binding is part of openHAB since version 2.3. If you're looking for the most stable version, use the binding from the distribution. The marketplace version will be for pre-releases or...
Last Updated on Wednesday, June 6, 2018 - 14:03 by Dennis Frommknecht
This is the beta release with new features and bug fixes for the Dutch Smart Meter Requirements (DSMR) Binding for openHAB 2.
The binding is available in openHAB 2.4. Install this version i...
Last Updated on Wednesday, January 2, 2019 - 17:35 by Hilbrand Bouwkamp
This is the binding for an alarm controller inspired by Aritech and Abus
The binding allows you to create alarm controllers with a configurable amount of alarm zones. Each alarm zone has a type ...
Last Updated on Monday, December 17, 2018 - 10:33 by Gerhard Riegler
Denon/Marantz binding for OpenHAB2.
Last Updated on Wednesday, January 3, 2018 - 09:13 by Jan-Willem Veldhuis
This is the Update release of the Spotify Binding with the following changes:
The deviceName was a option list with id as key, name as value. However that is not usable in rules. In rules onl...
Last Updated on Tuesday, April 9, 2019 - 06:48 by Hilbrand Bouwkamp
The Plugwise Home Automation binding adds support to openHAB for the Plugwise Home Automation ecosystem. This system is built around a gateway from Plugwise called the 'Adam' which incorporates a Z...
Last Updated on Monday, January 20, 2020 - 11:30 by Bas van Wetten
OpenSense.network is a participatory open sensor data platform.
This binding provides a link between OpenSense.network and several weather data b...
Last Updated on Tuesday, January 29, 2019 - 10:38 by Dimitri Staufer
The OpenDaikin binding allows you to control your Daikin air conditioning units with openHAB. In order to do so, your Daikin air conditioning unit must have a BRP072A42 WiFi...
Last Updated on Sunday, March 10, 2019 - 22:20 by Tim Waterhouse
The BTicino Smarther binding implements a bridge to the Legrand/Bticino Smarther v2.0 API and allows users to control their BTicino Smarther chronothermostat units (all models).
This binding is ...
Last Updated on Friday, June 26, 2020 - 02:44 by Fabio Possieri
This is an Eclipse SmartHome addon which installs a new human language interpreter based on Stanford CoreNLP. It allows you to ask questions about the state of your house (e.g. "...
Last Updated on Monday, June 18, 2018 - 17:24 by John Sichi
This templates takes a binary input from a push button and plays either a doorbell sound on a connected speaker or uses a dog barking sound to scare away any visitors if nobody is at home.
Last Updated on Wednesday, March 15, 2017 - 12:14 by Kai Kreuzer
The OpenOcean binding connects OpenHab to the EnOcean ecosystem. This binding uses an EnOcean gateway to retrieve sensor data and control actuators.
The followin things are f...
Last Updated on Sunday, June 30, 2019 - 16:21 by Daniel Weber