1724 Solutions and counting.
Current Version of the MySensors Binding for Eclipse Smarthome.
The OpenDaikin binding allows you to control your Daikin air conditioning units with openHAB. In order to do so, your Daikin air conditioning unit must have a BRP072A42 WiFi...
Binding for KOSTAL inverters of type PIKO IQ and PLENTICORE plus
This is the Sager WeatherCaster port to OH2. I put it on the marketplace as it will not comply with OH2 development standards. If it's usefull for you, that's enough for me !
This is the binding for an alarm controller inspired by Aritech and Abus
The binding allows you to create alarm controllers with a configurable amount of alarm zones. Each alarm zone has a type ...
This is the initial development for Brumberg vitaLED binding [vitaled]. This binding integrates Brumberg vitaLED via the Brumberg vitaLED LAN master that communicates via DMX with the Brumberg vita...
An OSRAM/Sylvania Lightify/SMART+ binding for openHAB2 that allows Lightify/SMART+ devices to be used via a Lightify gateway. Currently lights and power switches are fully supported, motion sensors...
The Plugwise Home Automation binding adds support to openHAB for the Plugwise Home Automation ecosystem. This system is built around a gateway from Plugwise called the 'Adam' which incorporates a Z...
The Satel Integra Alarm System allows openHAB to connect to your alarm system via TCP/IP network with ETHM-1/ETHM-1 Plus module installed, or via RS-232 serial port with INT-RS/INT-RS Plus module i...
Last Updated on Sunday, May 10, 2020 - 10:08 by Krzysztof Goworek
The BTicino Smarther binding implements a bridge to the Legrand/Bticino Smarther v2.0 API and allows users to control their BTicino Smarther chronothermostat units (all models).
This binding is ...
Last Updated on Sunday, May 3, 2020 - 05:19 by Fabio Possieri
This binding allows you to integrate modules (at the Moment AM, EM, JRM and DIM) of PHC, without the PHC control (STM).
In openHAB the binding depends on serial-transport.
Last Updated on Monday, April 13, 2020 - 08:45 by Jonas H
openHAB binding for Vallox air ventilation units.
Last Updated on Wednesday, April 8, 2020 - 02:34 by Miika Jukka
Fox Binding integrates with Nexwell Fox System – smart home solution with programmable automation. Provides tasks execution and results acquisition.
Last Updated on Thursday, March 26, 2020 - 05:39 by Kamil Subzda
openHAB2 version of ComfoAir Binding
Last Updated on Wednesday, March 25, 2020 - 14:15 by Hans Boehm
Last Updated on Thursday, February 20, 2020 - 13:59 by Tim Oberfoell
Last Updated on Monday, January 20, 2020 - 11:30 by Bas van Wetten
Control your SmartHome devices using Flic buttons (https://flic.io). Find more information about this binding on https://github.com/pfink/openhab2-flicbutton/
Last Updated on Saturday, January 11, 2020 - 18:31 by Patrick Fink
Binding for the OpenTherm Gateway device designed by Schelte Bron, which allows communication to boilers and thermostats using the OpenTherm protocol.
For more information on the OpenTherm Gatew...
Last Updated on Wednesday, January 8, 2020 - 08:17 by A. K.
This is an Eclipse SmartHome/openHAB binding for Australian weather forecast from Bureau of Meteorology (BOM).
Please see https://github.com/tomitan100/org.openhab.binding.bom for more...
Last Updated on Tuesday, December 31, 2019 - 11:16 by Thomas Tan
The OpenHAB binding provides readings and control of Philips Air Purifier devices.
Supported Philips Air Purifiers and hardware tested devices are
Last Updated on Thursday, December 5, 2019 - 08:58 by Michał Boroński
This binding integrates the Hive smart home system from British Gas. For the moment only the thermostat is supported but more will come in the future
Last Updated on Tuesday, October 22, 2019 - 06:24 by Chris Foot
This is an openHAB binding for Qbus
Last Updated on Friday, October 4, 2019 - 13:28 by Koen Schockaert
This new binding integrates BTicino / Legrand MyHOME(r) BUS & MyHOME_Play (wireless) devices using the OpenWebNet protocol.
It is the first known binding for openHAB 2 that su...
Last Updated on Sunday, September 22, 2019 - 06:53 by Massi Ti
This is the beta version of the binding and adds support for new features/fixes not yet available in the binding available in openHAB. This beta version adds the following:
Last Updated on Friday, August 30, 2019 - 08:41 by Hilbrand Bouwkamp
Pullrequest build of the Dresden Elektronik Deconz Binding for openhAB
Last Updated on Monday, August 26, 2019 - 02:29 by Bo Biene
A simple Binding with a single channel for showing the Water Alert Level for regions/cities in New Zealand.
Intended to be used with sprinkler automation.
Last Updated on Friday, August 23, 2019 - 07:47 by Stewart Cossey
Now included in openHAB 2.5 snapshot builds and the next milestone release (M3).
Adds support for HP Printers via the Embedded Web Server on the printer. Recently rewritten from scratch -&...
Last Updated on Friday, August 23, 2019 - 05:01 by Stewart Cossey
The OpenOcean binding connects OpenHab to the EnOcean ecosystem. This binding uses an EnOcean gateway to retrieve sensor data and control actuators.
The followin things are f...
Last Updated on Sunday, June 30, 2019 - 16:21 by Daniel Weber